Post new topic   Reply to topic    Mithril Knights Forum Index -> Website FAQ
View previous topic :: View next topic  
Eanna
Eanna
Friend

user avatar

Joined: 20 Jan 2008
Posts: 617

Send private message
Reply with quote

re: HOW TO: Vent Normalization

0
Ventrilo Normalization

Vent Normalization makes everybody's voice the exact same volume - you won't blow your ears out or have difficulty hearing people.

Here's how:
    - Go to Setup
    - Enable Direct Sound
    - Select the SFX Button
    - Select Compressor and click Add.
    - Under Compressor Properties use the following settings
    - Gain = Adjust for how loud you want people to be.
    - Attack = 0.01
    - Release = Around 500
    - Threshold = Around -40
    - Ratio = 100
    - Pre delay = 4.0

If someone has an "S" by their name you should remove it so that the global fix will work.
    - right click on the persons name
    - goto "Miscellaneous" and then to "Special Effects..."
    - select "Volume" in the left "Current" window
    - click "Remove ->"

Gain
How much volume you feed into the compressor. Not really relevant unless everyone is too quiet, then you can turn this up a little; turning it up too much will sound EXTREMELY shitty.

Attack
How fast volume change will happen. example: setting this to 500 means that anything coming in will only be dropped in volume after a half a second. for vent this should
be set as low as possible.

Release
how fast the compressor stops changing things. not really that relevant with vent, setting it around 500 is good for voice material.

Threshold
This sets the point where we actually start changing what's coming in. Whereas 0 is the absolute loudest you can have for an input, -60 is super quiet. Average users will probably come in somewhere around -25 to -15, with the occasional few being really quiet.

Ratio
How much any sound below the set threshold gets compressed and/or modified in the volume department.
If you still want to hear SOME volume variation then set this lower (2-4)... the higher you set it the closer in volume everyone will be.

Pre delay
Mostly just deals with processing; with computer and digital processors they can look ahead a few milliseconds to see what needs to be dropped in volume or changed before it actually comes through the speakers. Highest is ideal.


_________________
Posts from:   
Post new topic   Reply to topic    Mithril Knights Forum Index -> Website FAQ All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum